HyperX Fury 16GB 3000MHz DDR4 CL16 DIMM Black Single RAM

HyperX Fury 16GB 3000MHz DDR4 CL16 DIMM Black Single RAM

in stock

ر.س 409

• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• On-Die termination (ODT)
• 16 internal banks; 4 groups of 4 banks each
• Bi-Directional Differential Data Strobe
• 8 bit pre-fetch
• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
• Height 1.3425” (34.1mm), w/heatsink

in stock

- +
رمز المنتج: HX430C16FB4/16 التصنيفات: , , ,

HyperX HX430C16FB4/16 is a 2G x 64-bit (16GB) DDR4-3000
CL16 SDRAM (Synchronous DRAM) 1Rx8, memory module, based
on eight 2G x 8-bit FBGA components per module. Each module kit
supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each
module has been tested to run at DDR4-3000 at a low latency timing
of 16-19-19 at 1.35V. The SPDs are programmed to JEDEC
standard latency DDR4-2400 timing of 17-17-17 at 1.2V. Each
288-pin DIMM uses gold contact fingers. The JEDEC standard
electrical and mechanical specifications are as follows:

Default (JEDEC): DDR4-2400 CL17-17-17 @1.2V
XMP Profile #1: DDR4-3000 CL16-19-19 @1.35V
XMP Profile #2: DDR4-2666 CL16-18-18 @1.2V


CL(IDD): 17 cycles
Row Cycle Time (tRCmin): 45.75ns(min.)
Refresh to Active/Refresh Command Time (tRFCmin): 350ns(min.)
Row Active Time (tRASmin): 32ns(min.)
UL Rating: 94 V – 0
Operating Temperature: 0 C to +85 C
Storage Temperature: -55 C to +100 C

الوزن 0.5 kg


لا توجد مراجعات بعد.

كن أول من يقيم “HyperX Fury 16GB 3000MHz DDR4 CL16 DIMM Black Single RAM”

Start typing and press Enter to search

عربة التسوق

لا توجد منتجات في سلة المشتريات.