e-Retail.com
e-Retail.com
e-Retail.com
e-Retail.com
e-Retail.com
>
>
>
HyperX Fury 8GB 3200MHz DDR4 CL16 DIMM RGB Single RAM

HyperX Fury 8GB 3200MHz DDR4 CL16 DIMM RGB Single RAM

in stock

ر.س 239

• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• On-Die termination (ODT)
• 16 internal banks; 4 groups of 4 banks each
• Bi-Directional Differential Data Strobe
• 8 bit pre-fetch
• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
• Height 1.624” (41.24mm), w/heatsink

Delivery time between 3 to 7 business days.
وقت التوصيل بين ۳ إلى ٧ أيام عمل

in stock

رمز المنتج: HX432C16FB3A/8 التصنيفات: , , ,

HyperX HX432C16FB3A/8 is a 1G x 64-bit (8GB) DDR4-3200 CL16
SDRAM (Synchronous DRAM) 1Rx8, memory module, based on
eight 1G x 8-bit FBGA components per module. Each module kit
supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each
module has been tested to run at DDR4-3200 at a low latency timing
of 16-18-18 at 1.35V. The SPDs are programmed to JEDEC
standard latency DDR4-2400 timing of 17-17-17 at 1.2V. Each
288-pin DIMM uses gold contact fingers. The JEDEC standard
electrical and mechanical specifications are as follows:

FACTORY TIMING PARAMETERS
Default (JEDEC): DDR4-2400 CL17-17-17 @1.2V
XMP Profile #1: DDR4-3200 CL16-18-18 @1.35V
XMP Profile #2: DDR4-3000 CL15-17-17 @1.35V

 

SPECIFICATIONS
CL(IDD): 17 cycles
Row Cycle Time (tRCmin): 45.75ns(min.)
Refresh to Active/Refresh Command Time (tRFCmin): 350ns(min.)
Row Active Time (tRASmin): 32ns(min.)
UL Rating: 94 V – 0
Operating Temperature: 0 C to +70 C
Storage Temperature: -40 C to +100 C

الوزن 0.5 kg

المراجعات

لا توجد مراجعات بعد.

كن أول من يقيم “HyperX Fury 8GB 3200MHz DDR4 CL16 DIMM RGB Single RAM”

Start typing and press Enter to search

عربة التسوق

لا توجد منتجات في سلة المشتريات.