HyperX Fury 16GB 3600MHz DDR4 CL18 DIMM Black Single RAM

• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• On-Die termination (ODT)
• 16 internal banks; 4 groups of 4 banks each
• Bi-Directional Differential Data Strobe
• 8 bit pre-fetch
• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
• Height 1.3425” (34.1mm), w/heatsink

SKU: HX436C18FB4/16 Categories: , , ,

HyperX HX436C18FB4/16 is a 2G x 64-bit (16GB) DDR4-3600
CL18 SDRAM (Synchronous DRAM) 1Rx8, memory module, based
on eight 2G x 8-bit FBGA components per module. Each module kit
supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each
module has been tested to run at DDR4-3600 at a low latency timing
of 18-22-22 at 1.35V. The SPDs are programmed to JEDEC
standard latency DDR4-2400 timing of 17-17-17 at 1.2V. Each
288-pin DIMM uses gold contact fingers. The JEDEC standard
electrical and mechanical specifications are as follows:

FACTORY TIMING PARAMETERS
Default (JEDEC): DDR4-2400 CL17-17-17 @1.2V
XMP Profile #1: DDR4-3600 CL18-22-22 @1.35V
XMP Profile #2: DDR4-3000 CL16-19-19 @1.35V

 

SPECIFICATIONS
CL(IDD): 17 cycles
Row Cycle Time (tRCmin): 45.75ns(min.)
Refresh to Active/Refresh Command Time (tRFCmin): 350ns(min.)
Row Active Time (tRASmin): 32ns(min.)
UL Rating: 94 V – 0
Operating Temperature: 0 C to +85 C
Storage Temperature: -55 C to +100 C

Weight 0.5 kg

Reviews

There are no reviews yet.

Be the first to review “HyperX Fury 16GB 3600MHz DDR4 CL18 DIMM Black Single RAM”

Start typing and press Enter to search

Shopping Cart

No products in the cart.