Showing 1–16 of 17 results
-
Kingston 1000GB XS2000 External Solid State Drive (SSD) USB Type-C 3.2 Gen 2×2 Portable Drive
Save10.8%Save SAR 54OnlySAR 445SAR 499SAR 4451000GB Includes rubber sleeve and USB-C cable USB 3.2 Gen 2×2 Up to 2000MB/s read, 2000MB/s write Part Number: SXS2000/1000G
-
Kingston 2666MHz DDR4 Non-ECC UDIMM RAM
Save up to18.2%Save up to SAR 36OnlySAR 81 SAR 81 – SAR 169VALUERAM MEMORY Kingston Technology offers a range of ValueRAM modules to ensure end users can make the most of out their desktop and notebook computers. Designed to comply with JEDEC standards, these products come with a lifetime warranty and top reliability ratings.
-
Kingston 500GB XS2000 External Solid State Drive (SSD)
Save9.1%Save SAR 29OnlySAR 290SAR 319SAR 290500GB Includes rubber sleeve and USB-C cable USB 3.2 Gen 2×2 Up to 2000MB/s read, 2000MB/s write Part Number: SXS2000/500G
-
Kingston Data Traveler 2000 Encrypted USB Flash Drive
SAR 248 – SAR 498Kingston’s DataTraveler® 2000 is designed to be secure, with an alphanumeric keypad that locks the drive with a word or number combination, for easy-to-use PIN protection.
-
Kingston DataTraveler Exodia USB Flash Drive
Save up to55.9%Save up to SAR 100OnlySAR 79SAR 179SAR 79USB 3.2 Gen 1 5-year warranty
-
Kingston Fury Beast KF430C15BB1/16 16GB DDR4 3000Mhz Non ECC DIMM
SAR 315Memory Capacity 16GB Module Quantity 1 Module Speed 3000MHz (PC4-24000) Error Check Non-ECC Model/Series/Type Fury Beast Module Type DIMM CAS Latency CL15 Form Factor DDR4
-
Kingston KC600 SATA 2.5″ Hardware-based self-encrypting with 3D TLC NAND SSD
Save up to14.5%Save up to SAR 139OnlySAR 820SAR 959SAR 820Contains drive only, cloning software not included SATA Rev 3.0 XTS-AES 256-bit encryption, TCG Opal, eDrive 3D TLC NAND technology Up to 550MB/s read, 520MB/s write Part Number: SKC600/1024G
-
Kingston KVR32N22D8/16 16GB DDR4 3200Mhz Non ECC Memory RAM DIMM
Save33.6%Save SAR 97OnlySAR 192SAR 289SAR 192Memory Capacity 16GB Module Quantity 1 Module Speed 3200MHz (PC4-25600) Error Check Non-ECC Model/Series/Type ValueRAM Module Type DIMM CAS Latency CL22 Form Factor DDR4
-
Kingston SSD 480GB, 960GB A400 SATA 2.5″
Save up to32.9%Save up to SAR 49OnlySAR 100SAR 149SAR 100A400 SATA SSD in 2.5″ and M.2 Form Factors Kingston’s A400 solid-state drive dramatically improves the responsiveness of your existing system with incredible boot, loading and transfer times compared to mechanical hard drives. Powered by a latest-gen controller for read and write speeds of up to 500MB/s and 450MB/s1, this SSD is 10x faster than a traditional hard drive for higher performance, ultra-responsive multi-tasking and an overall faster system. Also more reliable and durable than a hard drive, A400 is available in multiple…
-
Kingston ValueRAM 16GB 3200MHz DDR4 CL22 DIMM Single RAM
SAR 195• Power Supply: VDD = 1.2V Typical • VDDQ = 1.2V Typical • VPP = 2.5V Typical • VDDSPD = 2.2V to 3.6V • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals • Low-power auto self refresh (LPASR) • Data bus inversion (DBI) for data bus • On-die VREFDQ generation and calibration • Single-rank • On-board I2 serial presence-detect (SPD) EEPROM • 16 internal banks; 4 groups of 4 banks each • Fixed burst chop (BC) of 4 and…
-
Kingston ValueRAM 32GB 2666MHz DDR4 CL19 DIMM Single RAM
Save32.2%Save SAR 193OnlySAR 406SAR 599SAR 406• Power Supply: VDD = 1.2V Typical • VDDQ = 1.2V Typical • VPP = 2.5V Typical • VDDSPD = 2.2V to 3.6V • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals • Low-power auto self refresh (LPASR) • Data bus inversion (DBI) for data bus • On-die VREFDQ generation and calibration • Dual-rank • On-board I2 serial presence-detect (SPD) EEPROM • 16 internal banks; 4 groups of 4 banks each • Fixed burst chop (BC) of 4 and…
-
Kingston ValueRAM 32GB 3200MHz DDR4 CL22 DIMM Single RAM
Save21.5%Save SAR 90OnlySAR 329SAR 419SAR 329• Power Supply: VDD = 1.2V Typical • VDDQ = 1.2V Typical • VPP = 2.5V Typical • VDDSPD = 2.2V to 3.6V • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals • Low-power auto self refresh (LPASR) • Data bus inversion (DBI) for data bus • On-die VREFDQ generation and calibration • Dual-rank • On-board I2 serial presence-detect (SPD) EEPROM • 16 internal banks; 4 groups of 4 banks each • Fixed burst chop (BC) of 4 and…
-
Kingston ValueRAM 8GB 1600MHz DDR3 CL11 DIMM Single RAM
Save6.7%Save SAR 15OnlySAR 209SAR 224SAR 209• JEDEC standard 1.5V Power Supply • VDDQ = 1.5V • 800MHz fCK for 1600Mb/sec/pin • 8 independent internal bank • Programmable CAS Latency: 11, 10, 9, 8, 7, 6 • Programmable Additive Latency: 0, CL – 2, or CL – 1 clock • 8-bit pre-fetch • Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] • Bi-directional…
-
Kingston ValueRAM 8GB 1600MHz DDR3L CL11 SODIMM Single RAM
Save5.2%Save SAR 11OnlySAR 199SAR 210SAR 199• JEDEC standard 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V) Power Supply • VDDQ = 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V) • 800MHz fCK for 1600Mb/sec/pin • 8 independent internal bank • Programmable CAS Latency: 11, 10, 9, 8, 7, 6 • Programmable Additive Latency: 0, CL – 2, or CL – 1 clock • 8-bit pre-fetch • Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does…
-
Kingston ValueRAM 8GB 2666MHz DDR4 CL19 DIMM Single RAM
Save35.2%Save SAR 44OnlySAR 81SAR 125SAR 81• Power Supply: VDD = 1.2V Typical • VDDQ = 1.2V Typical • VPP = 2.5V Typical • VDDSPD = 2.2V to 3.6V • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals • Low-power auto self refresh (LPASR) • Data bus inversion (DBI) for data bus • On-die VREFDQ generation and calibration • Single-rank • On-board I2 serial presence-detect (SPD) EEPROM • 8 internal banks; 2 groups of 4 banks each • Fixed burst chop (BC) of 4 and…
-
Kingston ValueRAM 8GB 2666MHz DDR4 CL19 SODIMM Single RAM
SAR 112• Power Supply: VDD = 1.2V Typical • VDDQ = 1.2V Typical • VPP = 2.5V Typical • VDDSPD = 2.2V to 3.6V • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals • Low-power auto self refresh (LPASR) • Data bus inversion (DBI) for data bus • On-die VREFDQ generation and calibration • Single-rank • On-board I2 serial presence-detect (SPD) EEPROM • 8 internal banks; 2 groups of 4 banks each • Fixed burst chop (BC) of 4 and…